THIS COLOUR WILL BE RESTOCKED. KEEP AN EYE ON THE RESTOCK PAGE FOR FUTURE UPDATES
Magnet not included but can be purchased HERE
DESCRIPTION - A pink / gold / green magnetic micro flake topper with iridescent blue flakes.
OPAQUE-in 2 to 3 coats depending on your application. Or use one coat over your favourite colour.
This is a more subtle magnetic. These micro flakes are not as reactive as other magnetic pigments. Be sure you are using a strong magnet to create the effects seen in the swatch pictures.
INSTRUCTIONS, TIPS AND WHAT TO REALISTICALLY EXPECT FROM A MAGNETIC POLISH.
1. Shake the bottle well. You only need to do this once.
Contrary to popular belief, shaking the bottle frequently and throughout your manicure, makes absolutely no difference to my magnetics ( trust me I’ve experimented with this )
2. Apply one coat of your favourite magnetic polish to all nails and allow to dry
3. Apply a generous coat to one nail only - this is especially important. The magnetic particles can only move when the polish is REALLY wet and it will start drying as soon as you apply it. If you tend to apply your coats thin, you are much less likely to see your desired effect on the nail.
4. IMMEDIATELY use the magnet for a minimum of 20 seconds. Hold the magnet as close to the nail as you can without actually touching the polish.
5. Repeat this step until desired opacity is reached. ( Wait for the previous layer to be touch dry before applying your next )
6. Apply your favourite top coat if needed and immediately use the magnet again for another 30 seconds minimum. As with above, you will get better results if you do one nail at a time.
1. Magnetics are similar to holographic polishes in the way that the magnetic effect is much more prominent in bright lighting. In dull / low lighting you may not notice the magnetic effect much.
2. Keep in mind that bloggers / swatchers generally use nice bright lighting for their photographs. This is so you can see all the details of a polish. But this can also make the magnetic effect appear more prominent than it may actually be in your real life lighting situations. I will always try to include a low light shot in my listings so please be sure to view ALL pictures of a product before deciding if it's right for you. For me personally, I have no trouble seeing the magnetic effect in all the different lighting situations in my home.
3. It’s also important to remember that top coating a magnetic can have an undesired effect on your magnetic lines. Most topcoats will allow the magnetic particles to continue to move away over time. It can take up to a full 24 hours for all layers of nail lacquer to fully "cure" and because the magnetic pigments are heavier than the other ingredients, they will continue to move and settle during this drying time which is what causes the lines to blur. In saying that, most swatchers take their photos immediately after application so your end result will most likely not look like theirs.
#Always do one nail at a time and be quick! If you wait too long your polish will begin to dry and the magnetic effect will not work well.
#The longer you hold the magnet over the polish, the more pronounced the effect will be, especially after top coating. I like to rest my magnet on something and just hold my finger under it whilst I do other things.
#I’m not entirely sure it helps but I gently blow on the nail whilst the magnet is over it. I feel it helps dry the top layer of the polish a little quicker and helps lock in the design a fraction more.
#Hold still. If you move the magnet or your finger around whilst trying to create your pattern, it will not be as defined as it could be.
All Emily de Molly polishes are handmade in Australia.
Our 5 free formula is vegan and cruelty free.
Our nail polish is free of:
Toluene, DBP, Formaldehyde, TSF resin (Formaldehyde Resin ) and Camphor.
Of course, its also free of all the other nasties like Xylene, Parabens, Animal-Derived ingredients and Phthalates.
1. Apply one coat of your favourite magnetic polish and allow to dry*
2. Apply another, slightly thicker coat of your magnetic nail polish and immediately place the magnet above your nail ( you want to get very close but do not touch the surface of your nail ) Hold the magnet above your nail for approximately 10-20 seconds. Use the thin side of the magnet for a cats eye effect. You will get much better results if you do one nail at a time.
3. Repeat step 2 if desired opacity is not reached. If using this one as a topper ( as intended ) then please modify these steps accordingly.
4. Apply your favourite top coat and immediately place the magnet above you nail again for another 10-30 seconds. You will get better results if you do one nail at a time.
#I find it is much better to do one nail at a time. If you wait too long your polish will begin to dry and the magnetic effect will not be as obvious.
#The longer you hold the magnet over the polish, the more pronounced the effect will be, especially after top coating.
*If you prefer to have a very well defined line in your manicure, you can also hold the magnet over the first coat.
Product images courtesy of:
Hashtag #emilydemollyphoenixflight and tag @emilydemolly for a chance to be featured!